In a typical two-story home, temperatures can vary by 8 to 10 degrees between upstairs and downstairs. This ranks among the most common HVAC complaints from homeowners. Upper floors trap warm air during summer while basements and lower levels stay cooler, creating inconsistent comfort throughout the house.
Pharo Heating & Cooling has helped Wisconsin homeowners solve temperature balance issues since 1983. Our factory-trained Bryant technicians specialize in airflow balancing, zoning systems and HVAC upgrades that restore consistent comfort to every floor.
This guide explains why upstairs rooms get hotter, what causes the problem and how to fix it.
Heat rises through convection. Warmed air becomes less dense and moves upward, settling in upper levels of your home. Cooler air sinks to lower floors. Your HVAC system works against this natural process, but several factors can undermine its effectiveness.
Most homes have ductwork with equal-length runs to each floor. This design ignores the reality that upper levels need more cooling power to counteract rising heat. Older homes compound the problem with undersized ducts that can’t deliver adequate airflow to second-floor rooms.
Attics absorb massive amounts of heat during summer. When insulation is inadequate or has settled over time, that heat transfers into upstairs rooms. Walls and ceilings without proper insulation let outside heat penetrate freely.
Older HVAC systems can’t match modern equipment for temperature balance. Single-stage systems operate at full blast or shut off completely, creating noticeable temperature swings between floors. They lack the controls needed to manage comfort across multiple stories.
Learn about air conditioners that efficiently cool every floor of your home.
Poor airflow, clogged filters and outdated equipment cause most temperature imbalances between floors.
Conditioned air struggles to reach upstairs for several reasons:
Gaps or disconnected sections mean cooled air escapes before reaching your rooms.
Clogged filters force blower motors to work harder while moving less air. Systems run longer, cost more to operate and still fail to cool upstairs rooms. Filters get dirty faster than most homeowners realize, particularly during peak cooling months when the system runs continuously.
Wrong-sized HVAC systems cause serious temperature control issues. Oversized units cool the first floor quickly, then shut off before conditioning upper levels. Undersized units run nonstop but never reach comfortable temperatures. Both problems trace back to poor load calculations at installation.
A thermostat on the first floor reads comfortable temperatures there while upstairs rooms overheat. Smart thermostats with remote sensors help, but proper configuration is necessary.
Check your HVAC system’s performance with controls and thermostats.
Learn about gas furnaces that work seamlessly with modern cooling systems.
HVAC zoning, regular maintenance and system upgrades restore even comfort throughout your home.
Zoning splits your home into separate areas with individual thermostats and motorized dampers in the ductwork. You control the temperature for each floor and decide when zones receive conditioned air. The upstairs zone gets more cooling during hot afternoons while the basement stays comfortable without waste.
Booster fans and balancing dampers redirect airflow to problem areas. A booster fan in the duct serving upper floors adds pressure to overcome distance and heat rise. Manual balancing dampers let you adjust how much air each floor receives. These improvements cost less than full system replacement.
Professional duct sealing applies mastic sealant or metallic tape to all joints and connections. Aeroseal technology seals leaks from inside the ducts, reaching difficult areas. Sealing attic gaps around recessed lights, plumbing penetrations and the attic hatch stops warm air infiltration.
Maintenance visits include coil cleaning, refrigerant checks, ductwork inspection and airflow testing at each register. Technicians spot developing problems before they affect comfort and keep systems running efficiently. Multi-story homes particularly benefit from annual maintenance, since performance issues show up as temperature imbalances.
Mini-split ductless systems provide precise room-by-room temperature control.
Learn how geothermal systems provide consistent comfort across all floors.
Yes. Humidity and airflow issues make upstairs rooms feel hotter than they are.
High humidity makes warm air feel heavier and less comfortable. Upstairs and downstairs might read the same temperature, but the upper floor feels significantly hotter when humidity levels rise. Humid air holds more heat energy, forcing your body to work harder to cool itself.
Poor airflow creates stagnant pockets that feel stuffy and uncomfortable. Dead zones form in rooms far from return air grilles or where supply vents get blocked. These circulation problems let allergens, dust and contaminants build up.
Keep indoor humidity between 30% and 50%. Higher levels make warm temperatures feel oppressive. Lower levels cause dry skin and respiratory irritation. Whole-home dehumidifiers work with your HVAC system to remove excess moisture, making upstairs rooms feel cooler without thermostat adjustments.
Improve comfort with humidifiers or dehumidifiers.
View full indoor air quality solutions to improve airflow and comfort.
Simple fixes like changing filters or adjusting vents don’t always work. That’s when you need expert help.
Professionals use tools homeowners don’t own. Thermal imaging cameras reveal where heat infiltrates your home or where insulation is missing. Digital manometers measure duct system pressure to identify restrictions and leaks. Anemometers test air velocity at registers to confirm adequate airflow.
Some problems require modified ductwork to increase capacity to upper floors. Others need a second, smaller HVAC unit dedicated to upstairs. Variable-speed systems provide better temperature control than older single-stage equipment. Programmable zoning controls can be added to most existing systems.
HVAC technicians look at your home as a complete system. They examine how heating and cooling equipment, ductwork, insulation, windows, and ventilation work together. This approach finds the root cause of temperature imbalances instead of just addressing symptoms.
Learn about professional air purification options for healthier airflow.
See how boilers and heating systems impact year-round temperature control.
Pharo Heating & Cooling has served as Madison’s home comfort expert for more than 40 years. We’ve built our reputation solving temperature balance problems for homeowners across Dane County and surrounding areas.
Temperature imbalances between floors signal inefficient HVAC operation. This translates to higher energy bills and increased equipment wear. Fixing these problems cuts long-term costs while improving comfort.
Our team assesses your current system, explains your options and recommends solutions for your budget and home.
Contact us to schedule your consultation.
Your upstairs doesn’t have to feel like a sauna. Schedule HVAC service with Pharo Heating & Cooling and get balanced comfort throughout your home.
Did you know that combining proper equipment maintenance and upgrades with appropriate insulation, air sealing…
How Your Home’s Air Quality Affects Your Health Open with a relatable insight about how…
If you’ve lived through a few winters in Madison, you know how quickly the temperature…
In Southern Wisconsin, where seasonal extremes are a way of life, maintaining year-round comfort in…
Preparing Your Home for Changing Temperatures As cooler weather approaches in Madison, homeowners are thinking…
Why Year-Round Home Comfort Matters in Madison Madison’s climate keeps homeowners on their toes. From…